This article provides recommended guidelines and setup when installing your Sensera Systems solar panel(s). For detailed instruction on installation, please refer to either of the below articles:
- Non-XL MC26, MC78, MC88, and SiteWatch-PRO2: Camera Installation Guide
- XL MC78, MC88, SiteWatch-PRO2 : Camera Installation Guide-XL Models
If your already installed camera is in Low Power Shutdown, the tips below may be referenced to verify proper solar panel positioning.
Part I: Solar Panel Positioning
- Solar Panel should not be shaded at ANY time
- Solar Panel should face South (North, if below the Equator)
- Solar Panel angle should be based on region
Please Note: Cameras located in challenging latitudes or areas with limited solar gain should use the Sensera Systems Solar Panel Mobile App, for better positioning
Part II: XL Model or Additional Solar Panel Positioning
The recommendations in Part I of this article also apply to an XL model camera line or users who purchased a supplemental solar panel. Customers should pay special attention to the following items:
- Camera should be placed in between your two solar panels
- Cameras that face the same direction as your solar panel, should have at least 5' of spacing to prevent any shadow obstruction
Comments
0 comments
Please sign in to leave a comment.